Tuesday, November 5, 2019

The-3-Step-Formula-to-Getting-Your-Dream-Job

The-3-Step-Formula-to-Getting-Your-Dream-Job Want a simple formula to attracting your dream job? Ryan Niessen over at CareerRealism breaks it down like this: Practical Value + Intrinsic Value = Total Perceived ValueWhat if your eligibility for the jobs you’ve always wanted  to wasn’t based on how valuable you are in the marketplace, or how many jobs there are, or your past salary? What if it was all about â€Å"Perceived Value†? Let’s break down the terms even more.1. Practical ValueWhat you do. Take the  example of a car, which drives, parks, has air bags, etc. For you, practical value is the skills that you have, like coding or architecture or content management or publicity strategizing or grant-writing or proofreading like a champ. You can still take measures to increase your practical value, like taking a class or getting a certification. Those things are real, and they matter!But! There’s also the subjective factor of your Intrinsic Value.2.Intrinsic ValueHow your prospective employe rs see you. To extend the car example, think of the difference between a Volvo and a BMW. They do the exact same things and have many of the same parts, but one is way fancier (and more expensive) than the other and functions as a status symbol. This is related to branding and perception, not to the actual practical worth of the car.3.  Total Perceived ValueSo how do you position yourself as even more valuable than you are? To boost your Perceived Value, cultivate an image of yourself with the following qualities:ExclusiveRareDifferentExcitingOriginalContrarianPopularBoast these qualities via your resume and cover letter, of course, but also show your employers you have the practical value they’re seeking and  the intrinsic value that will make them look good for hiring:Cultivate a poised, intelligent presence on LinkedIn and Facebook, and if possible, on your own website or blog.Don’t let your blog be a parking lot for your contact info- post your take on articles related to your field, write recaps of networking events or conferences, and maintain a friendly, professional social media presence to support it.â€Å"Authentically and confidently express yourself†- whenever you have the chance to take a stand on an issue, stand with it or against it thoughtfully and sincerely.This is all all within your control, and will produce a more confident, capable you on the other side. What boss wouldn’t love that?

Sunday, November 3, 2019

Bacterium Capsule Research Proposal Example | Topics and Well Written Essays - 500 words

Bacterium Capsule - Research Proposal Example It is a layer that lies outside the cell wall of bacteria, it is well organized and it is not easily washed off. This makes it diffuse through the tracheal system. Its slime layer diffuses into the surrounding medium as a loosen-demarcated secretion. The capsule usually consists of polysaccharides and is water soluble thus dissolves in the moisturize tracheae through the spiracles. Thus they are difficult to stain using standard stains as they do not adhere to the capsule (Chapman, 2004). Since the capsule remains pale and colorless, it is difficult to be detected and appears as a ring around the cell. The tracheae are water filled as they consist of a permeable membrane of the surrounding tissues which make the capsule soluble since it is water soluble. The water level, however, retracts due to the increase in the concentration of lactic acid found in the muscle cells during the respiration system. The capsule contains external chemical sensors which therefore detects the concentration of lactic acid, lowering the water potential in the system which is then drawn back into the cells through osmosis process while the capsule gets closer to the muscle cells. While the diffusion pathway is reduced as a result, the capsule can then be transferred more easily through the tracheal. The bacterium capsule is typically stimulated for easy movement throughout the system. The neurosecretory cells made in the cell body consist of the prothoracic gland which acts as circulatory s ystem storage gland and hormonal control of insect molting (Ulrich, 2009).

Friday, November 1, 2019

A Rose for Emily Research Paper Example | Topics and Well Written Essays - 1500 words

A Rose for Emily - Research Paper Example This situation injured Emily and her world was divided into before and after. Representing the main character the author makes an allusion to the New South. By such type of personification and allusion the author shows the New South as independent and mighty fighter for rights. The story is worth-discussing, thus the given paper will try to answer the question why Emily arouses sympathy with readers notwithstanding that she is a murderer. The first issue that will be discussed is the correlation of past and present as well as their confrontation. The main heroine Emily still lived in her past, thus she suffered a lot. She was not ready to get rid of the ties, which were important for her. From this side the murder of Homer can be easily explained. She did it intentionally. He was her lover and she wanted to keep him and the feeling, so the best way to do that was to murder him. The reader can feel a motif of independence and superciliousness. Emily scorned all the tittle-tattles abou t her private and social life that appeared in the town. Her relations with her beloved Homer belonged to her private life and the main problem of her social life was her refusal to pay taxes that became the subject of gossips. The act of murder can be interpreted as a symbol of independence. We can notice that this independence is also portrayed in her appearance. â€Å"She carried her head high enough - even when we believed that she was fallen. It was as if she demanded more than ever the recognition of her dignity as the last Grierson; as if it had wanted that touch of earthiness to reaffirm her imperviousness† (p.82). Iron-grey hear of Emily arouses a number of associations. Emily tried to live and conduct her personal life without any superstitions. The important question is what the hidden sense is and how it was depicted by the author. There are a lot of interpretations that refer to the plot of this story, its concealed meaning and secret sense. It is essential one s hould pay special attention to the methods and devices, which were applied by the author to create intrigue. Faulkner is not only a great narrator, but also a master of symbolism and characterization (O'Connor). It was mentioned that the iron-grey hair of Emily symbolized strength and independence. Another important symbol is the rose. It is one of the main and the most significant symbols in the story. If to analyze the story deeper it is possible to see that characters of the story are the prototypes of Old and New South (Fetterley 194). In order to understand the character of the main heroine better, it is essential to pay special attention to Homer Barron; the author depicted him as one of those men who liked to drink with younger guys. Women usually do not like such behavior and Emily was not an exception: â€Å""She will persuade him yet," because Homer himself had remarke

Wednesday, October 30, 2019

Information Engineering Essay Example | Topics and Well Written Essays - 1000 words

Information Engineering - Essay Example cus, it was soon found out by the White brothers that they had a winning business formula and were able to expand their business through acquiring new premises at different locations in the United Kingdom. By the end of 2008, White & White Theatre Group became an established cinema group with five cinemas in London, two in Brighton, and one in Portsmouth. At present, White & White Theatre Group is one of the leading cinema groups in the United Kingdom. The time when the White brothers launched their first cinema at Great Portland Street, they did not feel any need of using information technology in their newly established business. As a result, all the management and operational tasks were carried out using manual systems. As the White brothers expanded their business by increasing the number of cinemas, they knew there was a need to improve reporting but considering the high profits in the eighties, they did not show enough enthusiasm to really address improvements. Each cinema was run as a separate small business, with the cinema site manager being responsible for all operations on their site. Tickets for each show were sold using ticket books. As a result of significant advancements in information technology and an increase in use of personal computers in the 1990’s, it became unavoidable for the White brothers to run their business using information technology. Electronic Cash Registers were launched in all cinemas in the nineties, and in the late nineties, personal computers were introduced for word processing and spreadsheets. The company also gained capability of internet presence but only for advertising purposes rather than tickets sales which were done through telephone or in person. With the rapid growth of competition from other cinema chains, especially from multiplex cinemas showing the similar types of films found in White & White Theater Group programmes, nowadays the profits are falling day by day. At present, the top management is deeply

Sunday, October 27, 2019

Esterification of 4-methyl-2-pentanol and Acetic Acid

Esterification of 4-methyl-2-pentanol and Acetic Acid Joseph Nuernberg Esterification of 4-methyl-2-pentanol and Acetic Acid by Reflux and Distillation and Characterized by Infrared Spectroscopy Abstract: The objective of this lab was to successfully synthesize an ester from an alcohol and acetic acid. This experiment used 4-methyl-2-pentanol with excess acetic acid to produce (1,3-dimethylbutyl) acetate as seen in Figure 1. The mixture of acetic acid with 4-methyl-2-pentanol and sulfuric acid was refluxed, extracted, distilled and identified using IR spectroscopy. The ester had a fruity smell when obtained. The mass of the final product was 0.582g which gave a 34.6% yield. The results obtained indicated that the final product attained was the ester (1,3-dimethylbutyl) acetate due to the similar bond groups of C=O and sp3 C-H. The reason why the percent yield was low was because the nature of the reaction itself formed ether and ester and some product was lost through extraction. For future experiments, the process must be done a lot quicker in order to ensure the least amount of product evaporates. Introduction: Often in chemical labs, esters are artificially synthesized in order to produce an imitation of a flavor. An ester can be synthesized by the reaction of an alcohol with a carboxylic acid. In this experiment, (1, 3,-dimethylbutyl) acetate was formed through excess acetic acid and 4-methyl-2-pentanol as seen in Figure 1. The limiting reagent in this reaction is 4-methyl-2-pentanol so the theoretical yield of the ester product is dependent on 4-methyl-2-pentanol. Figure 1: Reaction of 4-methyl-2-pentanol with excess acetic acid For this reaction, the reflux will be utilized. Heat is applied with a boiling chip, to allow the reaction to occur. The vapor rises and escapes from the round bottom flask and is then cooled by the water condenser. The vapor turns back into a liquid and drips back into the bottom flask. In order to remove certain compounds, the synthesis involved extraction to isolate compounds. The denser layer or the aqueous layer will be at the bottom and can be removed with a pipette. The product of ether and ester was distilled to isolate the ester because esters have lower boiling points than the ether. In distillation, the substance with the lower boiling point evaporates and reaches the water condenser. The cool temperature allows the vapor to change states from gas to liquid which forces the liquid to drip back down the into the Hickman head due to gravity. In this reaction, the (1, 3,-dimethylbutyl) acetate was isolated from an unknown ether by distilling into the Hickman head. An IR spect rum of the final product is conducted to determine the desired product by comparing the bond groups of the given values. If the IR peaks and bonds are the same as the given, then the purified product would be the ester. A percent yield will be calculated to assess the amount of ester produced. Procedure: First, obtain an empty round bottom flask and find the mass. Add about 1.5mL of 4-methyl-2-pentanol in the flask and reweigh. With the 3mL of glacial acetic acid added, add sulfuric acid with a boiling chip. Conduct reflux with the apparatus conducted in previous labs with a water condenser attached to cool the reaction. Heat the apparatus for 60 to 70 minutes. Cool the reaction mixture and while stirring, add 2-3 mL of 5% aqueous sodium bicarbonate until carbon dioxide formation ceases. Transfer mixture and shake hard. Remove the aqueous layer and repeat the separation technique two more times. Remove as much water from the organic layer by adding small amounts of sodium sulfate and let the reaction stand for 10-15 minutes. After a week, transfer the reaction with the ether and ester into a vial and conduct distillation. Conduct distillation for 15 minutes at around 180 to 200 oC. Obtain and mass the final product. Conduct IR of starting reactants and products. Clean up stations and calculate the percent yield. Results and calculations: Table 1: Table of masses during experiment Theoretical yield for (1,3-dimethylbutyl) acetate = 1.68g of Percent yield: x 100% x 100%= 34.6% IR: Figure 2: IR before distillation Figure 3: IR after distillation Table 2: Values of IR for ester (1,3-dimethylbutly) acetate after distillation Discussion and Conclusion: For this experiment, the ester (1, 3-dimethylbutyl) acetate was synthesized from acetic acid and 4-methyl-2-pentanol. However, this is not a one reaction pathway because of the tetrahedral intermediate prevalent in esterification. The addition of the acetic acid leads to a more reactive electrophile. This causes a tetrahedral intermediate in which there are two equivalent hydroxyl groups. Then one of the hydroxyl groups is eliminated, a process known as tautomerism. This then gives water and ester as the final products. The reaction was successful produced from reflux but problems arose during the second component of this experiment, distillation. The ester also had a very distinct fruity smell. This reaction is refluxed because heat acts as a catalyst for the reaction. In the reaction pathway, the temperature is increased, allowing more geometrical collisions with the products and requires lower activation energy. This can be seen as an example of the Maxwell-Boltzmann curve. This was done uniformly by using the aluminum block at around 110 oC. After reflux occurred, a distillation apparatus was used in order to purify the ester from the ether. The boiling chip was added in reflux and distillation in order to ensure that the reaction did not overheat and burn the reaction. Boiling chips are often made from carborundum (carbon and silicon) which are chemically inert and allows sharp edges for bubbles to form which will not overheat the system. The substances in the reaction are allowed to boil more calmly rather than rapid boiling causing splatter and ruining the experiment. The water condenser was used for both in order to cool down the reaction in order to prevent burning of the reaction and ensuring that the product in the vapor state turned back into liquid state. The reason why anhydrous sodium bicarbonate was added was to ensure that any leftover water was absorbed and the remaining layer contained only the organic compounds. This was done a total of three times to ensure that minimal water was left, but some of the product leaked when shaken. The purpose of distillation is to separate compounds based on their boiling points. The reaction mixture that contained ester and ether was to be distilled in order to obtain the ester in the Hickman head. However, after letting the reaction stand for a week, most of the ether evaporated and the mixture was mostly ester. This explains why during distillation, the mixture in the conical vial disappeared as most or all went into the Hickman head. This can be seen in Figures 2 and 3. The IR of before and after distillation have similar values, peaks, and the exact functional groups which indicates that the mixture contained only the ester. The IR spectroscopy of after distillation shows that there is a C=O bond around 1735.27 cm-1, and a sp3 C-H bond around 2959.19 cm-1 which indicates that the compound shown is indeed an ester and that the objective was met since ester do have C=O bonds around 1750 cm-1 and sp3 C-H bonds around 2900 cm-1 . Ideally, the distillation process should be us eful in isolating the pure product, by allowing the ester molecules to be in a gaseous phase. Equilibrium will be established and allows the molecules to form back into a liquid phase in the Hickman head, but in this experiment distillation was not necessary. This just caused more chances of losing the ester by not fully attaining all the liquid from the Hickman head or by evaporating. The results yielded a 34.6% yield which suggested that there were errors within the reaction. One major reason as to why the yield was low was because of the nature of the reaction itself. The ether and ester in the conical vial was left to stand for a week. Because the ether had a lower boiling point than ester, most or all of the ether evaporated due to high volatility at room temperature. In addition, the ester also has a high volatility but lower than the ether because of the structure and the strength of the intermolecular forces. The ester has two oxygen atoms whereas the ether has one oxygen resulting in lower van der Waal forces. The ether was created as a byproduct which affected the maximum amount of yield of ester produced. Therefore, not all the reaction occurred to form an ester because during that time there were compounds that hindered the maximum amount of yield formed by forming a pathway for the ether. This was from the sulfuric acid reaction mechanism to produce an ether. The sulfuric acid dissociates into a proton and a bisulfate ion which forms with the OH group of the alcohol. The alcohol’s oxygen is protonated which forms an oxonium ion. The ion decomposes to carbocation and water and the carbocation reacts with another alcohol group to form another oxonium ion. The ion loses a proton to stabilize and forms an ether. If a stronger alcohol, perhaps 1-hexanol was used, a higher yield would be attained because the stronger intermolecular forces allows the reaction to have lower volatility and the ester and ether formed would also evaporate less. Because there are weaker van der Waal forces in the (1, 3-dimethylbutyl) acetate because of the lower carbon chains, more of the product was evaporated and lost. In order to ensure that a higher yield is attained, the reflux and distillation process must be done back to back or a lot quicker before the ester and ether evaporates at room temperature. Also an alcohol with a longer carbon chain s hould be used as stronger intermolecular forces allow more ester to form. While transporting the organic layers and further extraction, some of the product was lost. Even though this source of error is minimal, there were some product lost along the way by transporting through vials which affected the yield of the final product. Reflux is an effective technique that allowed Fischer esterification to occur. Distillation is a very useful technique, but should not be relevant when one of the substances evaporates due to high volatility. For future experiments, the reaction must be done much quicker in order to ensure that the least amount of ether and ester evaporates and is lost throughout the process and more precise instruments can be used to extract the organic layer. IR should still be used to discern the identity of the product. Because of the nature of the reaction itself, a yield close to the theoretical is very difficult to attain, a realistic approach would be around 60% yield. Work Cited: MSDS of (1,3-dimethyl butyl) acetate. http://www.chemicalbook.com/ChemicalProductProperty_EN_CB8373308.htm (accessed November 7, 2014). MSDS of 4-methyl-2-pentanol. http://www.sciencelab.com/msds.php?msdsId=9926088 (accessed November 7, 2014). Padias, Anne.Making the Connections. Hayden McNeil, 2011.

Friday, October 25, 2019

Araby(loss Of Innocence) Essay -- essays research papers

Loss Of Innocence In James Joyce’s Araby the boys loss of innocence may be confusing and even painful but at the same time it is important . It begins his journey into adulthood . The boy in Araby is experiencing something all young men experience , the first crush . It is a time in his life where he is having new feelings, and trying to express those feelings to the object of his affection is next to impossible . Even the simple act of watching Mangan’s sister brings up emotions in the boy . To say the least the boy is overcome when Mangan’s sister actually speaks to him . He is in fact so overcome that he doesn’t even know how heanswered the girl . To think a girl he has secretly watched every day and shyly followed from a distance while he walked to school is actually showing him some attention .Unfortunately for the boy the attention is mistaken for something more than it is. As the boy waits for the day he can go to the bazaar , he thinks of nothing exceptMangan’s sister. The boy sees her when he is going to sleep , when he wakes , and in school in his papers. The boy wants nothing more than to see Mangan’s sister again , but ,in his mind for him to do that he needs to get her something from Araby. The boy is so charged from his encounter that he says he wishes to annihilate the days separating him from going to Araby and ultimately Mangan’s sister . Finally when the day has arrived that he can go to Araby he has to wait for Uncle to get home . To the boys dismay his ...

Thursday, October 24, 2019

Corporate University Model Essay

From my readings and research I have learned about the corporate university model. I will be evaluating why many organizations today are emphasizing training as an employee development tool and focus on why utilizing the internal university structure has become very popular. I think that the corporate university model is a very effective model. It is an educational entity that is a strategic tool designed to assist its parent organization in achieving its goals by conducting activities that foster individual and organizational learning and knowledge. It is set up to bring common culture, loyalty, and belonging to the company. Our text states that â€Å"a corporate university model is a training model in which the client group includes not only company employees and managers but also stakeholders outside the company (Roe, pg. 551, 2010).† â€Å"It response to the rapid changes in information and technology that characterizes our society. A companion to the concept of life-long learning, the corporate university enables businesses, both for profit and not for profit, to maintain and expand the expertise of their workforces and, as a result, to secure their positions in the marketplace. The corporate university adds value to the business and, in some cases generates revenue (Gould, 2005).† â€Å"The top five organizational goals of corporate universities were to improve customer’s service and retention, improve productivity, reduce costs, retain talented employees, and increase revenue (Roe, pg. 84, 2010).† If revenue is generated, the chief learning officer develops and implements the appropriate business and marketing plans (Gould, 2005).† Training functions organized by the university model tend to offer a wider range of programs and courses (Roe, pg. 84, 2010). Culture and values tend to be emphasized more often in the training curriculum of corporate universities. It centralizes training to make sure that â€Å"best training practices† that may be used in one unit of the company are disseminated across the company (Roe, pg. 84, 2010). It also enables the company to control costs by developing consistent training practices and policies (Roe, pg. 83, 2010). â€Å"Companies  have found that investment in human capital in the form of training and development yields high returns. The ones that recognize the value of their employees and place a new emphasis on education and training are becoming more competitive, successful, and profitable as a result (Dutkowsky, 2014).† â€Å"Transferring knowledge leads to synergistic cost advantages, better implementation of organizational strategies, and competitive advantage. Organizations are implementing corporate universities to aid in knowledge transfer. This allows organizations to customize them to meet their training needs (Clinton, Merritt, & Murray, 2009). Knowledge is the primary ingredient in gaining a competitive advantage and knowledge is a firm’s main inimitable resource. Knowledge has to be effectively transferred within organizations in order to maximize the competitive advantage arising from knowledge (Clinton, Merritt, & Murray, 2009). Corporate universities are also vital to employees as well. In this day and age, responsibility and authority are pushed downward and all employees are expected to make decisions and to contribute to competitive advantage. This requires workers who can think and do for themselves (Clinton, Merritt, & Murray, 2009). Advanced education and continuous learning is crucial. â€Å"The key goal for an organization is to provide its workers with the ability to retool their skills and knowledge continually. Corporate universities allow employers to provide employees the opportunity to increase their knowledge, and in return, employees will take education from the corporate university and give bac k to the organization through innovation, efficiency, and productivity (Clinton, Merritt, & Murray, 2009).† Overall, corporate universities are built on a system that understands the chief concern for knowledge workers in nearly every industry and occupation is the shelf life of their knowledge, causing them to have a constantly retool their schools. Employees benefit from the corporate university movement in more ways than simply being able to perform their assigned jobs better. They also learn skills and possibly earn degrees that can be carried through their career, making they, themselves, more marketable to the workplace. Corporate universities are the â€Å"fast growing segment of the adult education market. Corporate universities strive to achieve their mission of developing programs that are clearly linked to business objectives and organizational strategy. These programs are designed to convey corporate culture and focus  on learning beyond on-the-job training. By doing so, many employees throughout the United States and abroad are offered educational opportunities that might not otherwise be available to them. In conclusion, the corporate university model is a very effective model. Organizations constantly need to adapt themselves to stay aligned with an ever-changing and increasingly complex environment. Corporate Universities puts â€Å"smart learning† at the forefront, with strategies to secure alignment between organization and environment, which need both speed of learning and learning in the right direction. Across the globe, corporate universities have emerged as vehicles of such strategy-driven learning. References Clinton, M., S., Merritt, K., L., & Murray, R., S. (2009). Using corporate universities to facilitate knowledge transfer and achieve competitive advantage: An exploratory model based on media richness and type of knowledge to be transferred. Retrieved from: http://eds.b.ebscohost.com.proxy-library.ashford.edu/eds/detail?vid=2&sid=4fbbc155-1ebe-4a53-b4b7-309ae9d4306c%40sessionmgr112&hid=115&bdata=JnNpdGU9ZWRzLWxpdmU%3d#db=psyh&AN=2009-19970-003 Dutkowsky, S. (2014). Trends in Training and Development – THE NEW ECONOMY, TRAINING IN U.S. COMPANIES, WHO DOES THE TRAINING IN CORPORATIONS? Retrieved from: StateUniversity.com http://careers.stateuniversity.com/pages/852/Trends-in-Training-Development.html#ixzz34jTinPJA Gould, E., K. (2005). The Corporate University. A Model for Sustaining an Expert Workforce in the Human Services. Retrieved from: http://bmo.sagepub.com.proxy library.ashford.edu/content/29/3/508.full.pdf+html Noe, R. (2010) Employee Training and Development (5th editi on). McGraw-Hill/Irwin